ACN-8: WIRE FEEDER PROGRAMMED TO CN FROM Ø 3 TO Ø 8
- Feeding wire from Ø 3 to Ø 8.
- High speed feeding, completely adjustable from 0 to 150 metres / minutes.
- Feeding precision +/- 0.1mm.
- Compact design.
- External encoders for a exact size control.
- Covers with security detectors. Download Technical Information – Request for a Budget.
ACN-16: WIRE FEEDER FROM Ø 5 TO Ø 16
- Feeding wire from Ø 5 to Ø 16mm.
- High speed feeding, completely adjustable from 0 to 80 metres/minutes.
- Feeding precision +/- 0.1 mm.
- Compact design.
- External encoders for an exact size control. Download Technical Information – Request for a Budget.
CH-P-10: BEVELLING TOOL (CHAMFERING TOOL) FROM Ø 2 TO Ø 10
- High speed bevelling. Example: A bevel of 3 x 45º in a rod, is carried out in 0.3 seconds.
- Can be used in manual mode or connected to a machine and operated in automatic mode.
- Long life plates (completely standard).
- The same head is able to make different types of grooves and bevels in the wire. Download Technical Data – Request for a Budget.
CH-V-10: HIGH SPEED BEVELLING TOOL (CHAMFERING TOOL) FOR MAKING BEVELS IN WIRE RODS UP TO 10 MM OF DIAMETER.
- Can be used manually or automatically when connected to a machine.
- A holding gag is incorporated.
- Used for continuous work.
- Very easy to regulate depth of bevelling by means of a stop screw. Download Technical Data – Request for a Budget.
MOTORIZED WIRE DECOLIERS.
- Motorized wire decoiler, for feeding the wire.
- It is equipped and controlled by an electronic system.
- The gear motor is equipped with a mechanical brake, which acts as a torque limiter to prevent the gearbox suffers sudden starts and braking.
- The machine doses the wire precisely, without stopping or pulling.
- The wire supply speed can be adjusted for each part.
- The machine incorporates security to avoid wire snags.
- This machine complies with the European regulations approved and required by the CE: MAQUINAS 2006/42/CE.
- It is a robust, productive and maintenance-free accessory
- MODEL DVM-1000: This wire decoiler is prepared to work with rolls of about 1,000 Kg. The diameter of the coil can be a maximum of 1,050mm and a minimum of 350mm. It accepts wire diameters from 1 to 8mm and ribbed wire up to 6mm.
- MODEL DVM-2000: This wire decoiler is prepared to accept rolls of about 2,000 kg. The diameter of the coil can be a maximum of 1,500mm, and a minimum of 400mm. It accepts wire diameters from 1 to 8mm and ribbed wire up to 6mm.
- MODEL DVM-3000: This wire decoiler is prepared to accept rolls of about 3,000 Kg. The diameter of the coil can be a maximum of 1,500mm and a minimum of 400mm. It accepts wire diameters from 6 to 16mm and ribbed wire up to 16mm..
- Download Technical Data – Request for a Budget.
WIRE ROLLER STRAIGHTENERS
- A fast and easy system for straightening wire.
- Made up of 2 bodies of several rollers each, one body in horizontal position and other body in vertical.
- Models from Ø 0.3 mm up to Ø 16mm.
- Compact and robust construction.
- To tense the wire it is only necessary to tighten the tensing screw, there is no need to loosen the rollers. Download Technical Data – Request for a Budget.
RSC-10-L: THREAD ROLLING HEAD FOR LAMINATION. SHORT THREADS UP TO METRIC 10.
- Used for laminating short threads of up to M.10.
- Can be used manually or automatically when connected to a machine.
- High thread speed, example: a M.10×10 length thread takes 0.2 seconds.
- Long lasting thread rollers.
- Incorporate: lubricator with oil sprayer, transport carriage, and rod centralizer. Download Technical Data – Request for a Budget.
CM-12 CN: MULTIFUNCTION THREADING AND CHAMFERING HEAD TOTALLY PROGRAMMABLE.
- This head can make chamfers uo to diameter 12
- Thread with cutting die.
- Thread for lamination.
- This head can be used as bender as wire roll.
- It can be combined with a feeder to make springs or bends.
- Can be used manually or automatically connected to a machine. Download Technical Data – Request for a Budget.
REIVAX MAQUINAS, SL – C/ Sant Francesc, S/N – Nave 3 – 17400 – Breda (Girona) Spain – E-mail: info@reivaxmaquinas.com – WebPage: www.reivaxmaquinas.com – Phone: (+34) 972 870 258
REIVAX MAQUINAS FACTORY LOCATION: GOOGLE MAPS